Starting the iPod Diagnostic Mode
In order to access the inbuilt Diagnostic menu on the Nano, you need to press a combination of keys immediately after restarting it.
Toggle the Hold switch to Hold, the off again.
Press and hold Menu and Select (the centre button) for at least 6 secs, or until the Apple logo appears! - for iPod 1G to 3G press Menu and Play - hereafter referred to as the ‘Reset Method’
As soon as the Apple Logo appears, press and hold |<< and Select - For iPod 1G to 3G press |<<, >>| and Select
Navigating the Diagnostic Menu
Once you are in Diagnostic Mode, use the >>| and |<< buttons to navigate the menus. In most cases Menu will go back one menu, and Select will select the menu option. You can exit the menu at any time by selecting Power, Reset or by pressing Menu and Select (Menu and Play for 1G to 3G) to reset it.
Note: The menu’s shown below are from my iPod Nano 3G, and may vary to the menus you see.
iPod Diagnostics BuildID: d002
SVC Sep 10 2007 v.0072
—————————————————–
>Power
Sleep
Audio
Video
LCD
IO
Memory
TouchWheel
About
Power:
Within here you have;
ACC_Identify - Shows ACC = 2.497V
BatteryA2D - Shows 4.062V Ref=255
HighPower - Puts the screen on full brightness and shows a start time, Voltage (3.982V) and current (100mA)
ChargeCurrent - Shows Cur=100mA Battery = 4.046V
Reset - Resets the iPod
Sleep:
Sends the iPod to “DeepSleep” - you’ll need to do the Reset method above to restart it.
Audio:
Allows you to test the Headphone detection and play test tone. Interestingly there is an option to record from ‘Line In’ - Watch out for the Test Tone, its *VERY* loud!!
Video:
Has one option “TVPattern” that didn’t seem to do much, and needed me to do the reset method above to get out of it.
LCD:
Within here you have;
ColorPattern: Shows a series of patterns on the LCD. |<< turns off the backlight, >>| sets it to dim, Select goes to next pattern. You have to look at all 25 before you can exit.
Backlight: This allows you to check the back light, using the |<<, >>|, Play and Action buttons. Menu exits this screen.
ReadLCMID: Reads vendor info about the LCD. Mine Shows Vendor ID: 38 PanelID: 55 BuildID: 71 Read ID: OK
IO: (Input Output)
ACC_Switchtest: Not sure what this is… Accessories detector?
IOStatuses: Mine shows; HP_DETECT: 1 LCD_ID1:0 LCD_ID2:1 USB_DETECT:0 FW_DETECT:0 ACC_DETECT:0 HOLD_SWITCH:1
Memory:
SdramQScan: Does a very quick SDRAM Test
NANDSPEC: Mine Shows; NandLBA=991232 NAND SIZE:3.819200
Touch Wheel:
TouchWheelID: Mine Shows; 0:9045003a, 1:c609013a, 2:8000023a, 3:8000033a, 4:8066043a, 5:8001053a
WheelAndKey: Lets you test the touch wheel and all the keys (interesting that this is the only place the wheel works!)
About:
This shows various information and the iPod’s serial number, as show below
About Information
SrNum: 6U73xxxxxx (Obscured on purpose here!)
Mod#: MA978
Regn: 1 0 2 0 37 0 1
Fwld:
01000000
1a1b9639
000a2700
00000000
HwVr: 00140010
vrsn: 1.32.f.2
So that’s it. Hopefully this will of use to someone who has a problem with the 3rd-Gen Nano!
Mam nadzieje ze komus sie przyda bo dluzsza chwile szukalem opisu diagnbostic menu w moim modelu. Znalazlem kilka ale cos jakos nie moglem sie polapac do konca a tutaj ladnie i przejrzyscie co i do czego dla Nano 3 G.
Tutaj mam pytanie, a mianowicie odnosnie blokady na glosnosc naszych iPodow. Jesli mammy wersje europejska (z blokada) to nasz Regn: 1 0 2 0 37 0 1 jest taki ? czy o co chodzi ktos to lapie ? w kazdym razie ja mam taki sam jak osoba robiaca ten artykul.
Artykul zostal zaczerpniety ze strony [URL="http://www.internet-tools.co.uk"]CommsBlog[/URL] . A dokladny adres do tego artukulu [URL="http://www.internet-tools.co.uk/blog/index.php/2008/01/30/ipod-nano-3rd-generation-diagnostics/"]tutaj[/URL] .
Pozdrawiam ddnngg
