Skocz do zawartości

Witaj!

Zaloguj lub Zarejestruj się aby uzyskać pełny dostęp do forum.

Zdjęcie
- - - - -

Windows XP - brak dźwięku


  • Zaloguj się, aby dodać odpowiedź
Brak odpowiedzi do tego tematu

#1 kamiledi15

kamiledi15
  • 3 postów

Napisano 03 listopada 2018 - 19:59

Witam,

na wstępie napiszę, po co mi Windows XP na Macu - mój tata pracuje na starym windowsowym programie. Najpierw mieliśmy na tym Macu Windows 7, program taty się trochę na nim psuł, więc zawieźliśmy komputer do informatyka, żeby wgrał nam Windows XP (sam wolałem się w to nie babrać). Program taty działa, Windows XP też, ale - nie ma dźwięku. Informatyk rozłożył ręce. W internecie znalazłem kilka porad:

1. Wgraj sterowniki z płyty Maca - instalator się obraża, że z tak starym Windowsem to on nie będzie pracował.

2. Ściągnij sterowniki w systemie Mac przez Bootcamp, wgraj je na pendrive i wgraj na Windowsie - najpierw pendrive po tym zabiegu nie chciał się odpalić na Windowsie, wszedłem więc jeszcze raz na system Maca (nawiasem mówiąc, na Macu dźwięk działa, tylko na Windowsie nie), w plikach pendriva znalazłem plik Realtek Setup - domyśliłem się, że to do dźwięku, więc skopiowałem go, odpaliłem na Windowsie, ale instalator stwierdza, że "Żaden sterownik nie był obsługiwany przez ten pakiet sterowników".

3. Otwórz Menedżer urządzeń, otwórz urządzenie audio i zaktualizuj sterownik - efekt:

8z1ZVny.jpg

Przy okazji po lewej stronie widać, jak wyglądają moje urządzenia. Przy urządzeniach audio są wykrzykniki.

4. Sam z siebie wgrałem też z internetu sterowniki Realtek, niby się wgrały, ale nic to nie dało. Znalazłem tez jakiś program Driver Talent, który sam wyszukuje sterowniki. Znalazł mi sterownik Cirrus do urządzeń audio. Wgrałem to, jak widać Cirrus pojawił się w menedżerze urządzeń, ale dźwięku jak nie było, tak nie ma.

5. Ostatnia porada, jaką znalazłem na konkurencyjnym forum Appla:

 

This fix will only help if you are missing that line, or if you have a yellow exclamation point on that line! If you have that line, and there's no yellow exclamation point, then stop here and look elsewhere - you've got a different situation.

Okay, now that you've confirmed that you're missing the Plug and Play Software Enumerator, or that it's broken:

1) Make sure you have the following two files in Windows (do a search - they should be there):
* streamci.dll
* swenum.sys
You don't need to do anything with them, just make sure they're there.

Then:
1) Copy machine.inf from WINDOWS\inf to a temporary location
2) Edit the temporary copy of machine.inf - remove the line that says "ExcludeFromSelect=*", and save the file
3) in Control Panel, choose "Add Hardware"
* at the 'Welcome to the Add Hardware Wizard' window - click Next
* at the 'Add Hardware Wizard' window (when it finishes searching) - click 'Yes, I have already connected the hardware', then click Next
* scroll to the bottom of the list of 'Installed hardware', and click on 'Add a new hardware device', then click Next
* click 'Install the hardware that I manually select from a list (Advanced), then click Next
* click 'Have Disk...', and browse to and select the edited machine.inf file
* scroll down in the list of 'Common hardware types', and click on 'System devices', then click Next
* under 'Manufacturer' on the left, select '(Standard system devices)'
* under 'Model' on the right, select 'Plug and Play Software Device Enumerator'
* click Next

Once the installation is finished, and the Device Manager shows the Plug and Play Software Device Enumerator under 'System devices', the audio should now work (no reboot required)

Faktycznie, nie mam tego Plug and Play Software Enumerator. Zrobiłem wszystko, co ten koleś kazał, niby się to zainstalowało, ale na koniec system się zawiesił i jakoś nie pojawiło się to w menedżerze.

Każdą z powyższych porad znalazłem w internecie i najwyraźniej każda z nich komuś pomogła, ale nie mi. Proszę o pomoc, co jeszcze mogę zrobić.






Użytkownicy przeglądający ten temat: 0

0 użytkowników, 0 gości, 0 anonimowych